Solar Water Heater, Compact Pressurized Solar Water Heater

• Solar Hot Water Heaters (8)
  
• Non Pressurized Solar Water Heaters (7)
  
• Solar Heating Systems (7)
  
• Split Solar Water Heaters (6)
  
• Thermosiphon Solar Water Heaters (5)
  
• Compact Pressurized Solar Water Heaters (5)
  
• Pool Solar Heaters (1)
  

• Flat Solar Collectors (5)
  
• Solar Collector Projects (5)
  
• Solar Thermal Systems (4)
  

• Solar Water Heater Accessories (9)
  
• Solar Vacuum Tubes (5)
  
• Heat Pipes (1)
  

Contact Info Tel: 0086-573-87788246 Fax: 0086-573-87788270 www.collector-solar.com Key Contact: Mr. Jianhong Quan Online Inquiry

Pressurized Stainless Solar Water Heater

• Model Number:
  ITERMA-CPSS
  
  
• Description:
  Solar& Electric:
  Integrated pressurized vaccum tube solar water heater works with pressure up to 0.6 Mpa and can normally work in all climate. The absorptive coating of vaccum tube is ALN/ALN-SS/CU. This coating has high absorbing ratio(0.94) and low emission ratio(0.6). The heat efficiency is 0.64. The life span of the vaccum tube is 15 years. The vaccum tube is made of borosilicate 3.3. No water in the vaccum tube. Even if some vaccum tubes are broken, the integrated pressurized vaccum tube solar water heater can normally work.
  Characteristics:
  1. It is not easy to be frozen and cracked down even in hash weather.
  2. The shortcoming of bursting of tube or water leakage due to aged rubber ring is eradicated;
  3. The water tank is welded scientifically under the high frequency weld and argon-arc weld. The integrated pressurized vaccum tube solar water heater can be directly connected with tap water system to operate automatically with pressure-bearing.
  4. Water proof grade: IP *4
  5. Hot water can be used directly, or can be used as a pre-heat.
  6. Electric heater can be used 1500W or 3000W
  
  Specification:
  1. The inner tank is made of SUS304-2B stainless steel (thickness: 0.3mm-0.6mm).
  2. The outer tank is made of SUS 304-BA stainless steel. (thickness: 0.3mm-0.6mm).
  3. Heat insulation layer: Imported PU(thickness: 55-60mm).
  4. The normal size of vaccum tube is 58mm*1800 and 47mm*1500mm.
  5. The bracket is made of color steel with power painting (thickness: 1.2-1.5mm). Color is optional.
  6. Bracket degree: 45 /38 degree(normal). The actual value can be adjusted according to your latitude.
  7. Rated Voltage of electric heater: 220V or 110V
  
  Learn more about products detailed description, pricing and service, Please send mail to us!